9094 High Power Miniature SIP Reed Relays

The 9094 Series is the high power 20W version of Coto Technology’s industry standard 9091 MiniSIP relay. The robust contacts and small size of the 9094 series make it ideal for ATE and other high-reliability test and measurement applications where high board density and long life are key requirements.  Download Datasheet

9094 Series Features

  • 9094 is a 20W SIP relay measuring .600” x .150” x .275”
  • 40% less board space (LxW) than the 9001 series
  • Optional coil suppression diode protects coil drive circuits
  • High insulation resistance, 1012Ω minimum
  • Molded thermoset body on integral lead frame design
  • High reliability, hermetically sealed contacts for long life
  • RoHS compliant

9094 SERIES DIMENSION

In Inches (Millimeters)
  • 9094 mechanicals
  • 9094 mechanicals

9094 SERIES TECHNICAL INFORMATION

9094 Series Schematics

Top View:
Dot stamped on top of relay refers to pin #1 location
Grid = .1”x.1” (2.54mm x 2.54mm)

  • 9094 schematic

9094 Series Product Notes

1Consult factory for life expectancy at other switching loads. Resistance >0.5Ω defines end of life or failure to open.
2Optional diode is connected to pin #2 (+) and pin #3(-). Correct coil polarity must be observed.

9094 Series Environmental Ratings

Storage Temp: -35°C to +100°C; Operating Temp: -20°C to +85°C; Solder Temp: 270°C max; 10 sec. max
All electrical parameters measured at 25°C unless otherwise specified.
Vibration: 20 G’s to 2000 Hz; Shock: 50 G’s

9094 Series 3D Layout Models

9094 Series Order Information

9094 order info
Coto Technology